RCM-MTC2-FEPC LCG Floating Receiver/Fan Plate Set For Mugen MTC2 - Carbon

En stock

SKU RCM-MTC2-FEPC
Qty in stock 6
Expédition Rapide 24h :
Votre commande vous parvient en un jour.
Paiements Sécurisés :
Tranquillité d'esprit à chaque transaction.
Support H24 :
Assistance continue, jour et nuit.
Prix Compétitifs :
La qualité au meilleur prix, toujours.

Description / RCM-MTC2-FEPC LCG Floating Receiver/Fan Plate Set For Mugen MTC2 - Carbon

Introducing our brand new Floating Electronics Weight Plate Set for the Mugen MTC2 in Carbon!

Don't want to add too much weight to the car, but want to experience the benefit of the floating electronics? Then this set is for you! The set includes a carbon shim which floats it 0.5mm off the chassis, meaning the plate itself has minimal to no impact on the flex of the chassis. On top of the plate, we have 12g of brass weight to secure it in place. The plate attaches to the Fan Mount hole on the chassis, located in front of the motor.

The plate itself is 1mm thick, the set coming in at only 2.5g is a brilliant way to add minimal weight and have no impact on the flex characteristics of the chassis at the same time! 

Another added bonus, is you can change chassis or clean your car, and simply remove your RX, Transponder and Fan simply by undoing one screw! No more annoying double sided tape. Simply tape your electronics to the plate, set and forget! 

If you are after more weight for your car, you can look into the Floating Brass Set, which has several options for increasing the amount of weight under your receiver, transponder and fan.

We also have our brilliant new Optional 3D Pro Direct Mount fan shrouds which will mount directly on top of the plate! This is a great way to mount your electronics and fan all in one, plus keeping your motor cooler with the added benefit of a fan shroud. When using the shrouds, you will remove the 12g weight from the kit, and replace it with the shroud. The shrouds weight in at 12g for 40mm and 10.5g for 30mm, so the overall weight of the set will be relatively unaffected by swapping out the weight for the shroud. 

Weights:

  • Standard Kit: 14.5g

Kit Includes: 

  • 1x 1mm Carbon Floating Plate (2.5g)
  • 1x 3mm Brass Screw on Weight (12g)
  • 1x 0.5mm Floating Plate Shim
  • 1x M3x5 Countersunk Gold Plated Stainless Screw

Options Sold Separately:

  • 3D Pro Direct Mount Fan Shroud (30mm or 40mm)
  • Optional 21g Brass Weight Plate 

Plus d’information

Marque RcMaker
Spécifications MTC2 Optional
Utilisé pour PRO Tools
Rédigez votre propre commentaire
Vous commentez : RCM-MTC2-FEPC LCG Floating Receiver/Fan Plate Set For Mugen MTC2 - Carbon
loader
Chargement en cours...

check-circle L’avis est en cours de validation.